GeoDesy Gigabit AF with auto failover - Manual (Page 28)

GeoDesy Kft. Telefon: 06-1-481-2050
Fax.: 06-1-481-2049
E-mail: [email protected]
http://www.geodesy-fso.com
28
Security
On the security section you can set the username and the password for the unit. If
you have forget the usernam and/or the password please contact The technical
support.
MGM Trusted-host filtering: Here you can adjust two addresses wehre you can till in
from which computer with you reach the MGM! To adjust you will hove to adjust a
filter.
Filter adjust:
Off: Turned off.
IP: Only see the IP address.
MAC: Only see the MAC address
IP+MAC: Either IP or MAC address should be equal to the adjusted.
IP&MAC: Both IP and MAC addresses should be equal to the adjusted.
Auto-focus setup (AF)
Automatic divergence corrections:
Enabled (auto): adjust beam size to the best level according to the remote level.
Disabled (manual): It disables the automatic adjustment routine, and lets the user
adjust the beam size by using the „STEP” buttons.
Last activity: which the AF (auto focus) has done.
idle: AF was not active..
setting default: saves the standard settings.
moving default: return to default settings.
moving to open: opens to widest beam.