Gamber-Johnson 7160-0380 User Manual
Page 3
Operation:
1. To open the shelf, press the lock button on the front of the shelf and pull shelf towards rear
of vehicle.
2. Once the shelf is fully extended, magnets will help keep the shelf out when on a slight
incline.
3. To close shelf, press shelf back to retracted position. Caution: Avoid getting fingers under
front lip during closing. The shelf will latch automatically when fully retracted.
4. For additional security, the latch can be locked with the supplied keys.
Caution: To avoid damage to the shelf or items on the shelf, always ensure the shelf is
retracted and latched before driving the vehicle.
Additonal Accessories:
To protect equipment on the shelf and retain any loose items, purchase and install the Shelf
Rail (7160-0386). The Shelf Rail is installed into threaded inserts in the front of the shelf
using hardware supplied with the Shelf Rail.
5/16-2.25" BOLT
INSTALL THROUGH
CHILD SEAT ANCHORS
BODY HARDWARE NOT SHOWN:
CHILD SEAT ANCHOR
LOCK WASHER
BUSHING
FIG. 5 - Mounting Hardware
NOTE TRIANGLE
DIRECTION