Gamber-Johnson 7160-0422 - Manual

Rev.B INST-569
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
PS-001
INSTALLATION INSTRUCTIONS
1500 & 1500SSV - 2011+
Printing Spec:
Product Form Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
LEG KIT - CHYRSLER/DODGE - RAM -
7160-0422
M8 threaded hole thru hole
thru hole thru hole thru hole
2. Assemble 1/4-20 x 2.00" Button Head
Screw, jam nut and Clamp Plate to
Front Leg as shown above.
Insert tab on Front Leg into thru hole
as shown in photo.
1/2
1. Remove center seat section and
seat brackets.
Note the mounting points for the
Front Leg - a M8 threaded hole toward
the drivers side, a thru hole toward the
passengers side (under carpet).
Rear Leg
Clamp Plate
Button Head Screw
Tab
Front Leg
1/4-20 x 2.00 Socket
Jam Nut
© Copyright 2013 Gamber-Johnson, LLC