beautypg.com

General notes, Use of the manual, Ce conformity – EUCHNER Electronic-Key Adapter with serial Interface User Manual

Page 4: Approvals, Correct use, Incorrect use, Obligations on the operating organization, 1 general notes, 1 use of the manual, 2 ce conformity

background image

Manual EKS Electronic-Key Adapter serial

088796-02-03/05

Subject to technical modifications

Page 4/24

1 General

notes

1.1 Use of the manual

This manual describes the technical features and the function of the EKS Electronic-Key adapter
EKS-A-ISX-G01-ST09/03 with serial interface (order no. 084 750). The complete evaluation and interface
electronics are integrated in this unit.

1.2 CE

conformity

The EKS Electronic-Key adapter with serial interface conforms to the EMC directive 89/336/EEC (92/31/EEC,
93/68/EEC) and the low voltage directive 73/23/EEC (93/68/EEC, 98/79/EC).

The Electronic-Key adapter complies with the following European / international standards:

EN 61000-6-2

Electromagnetic compatibility (EMC). Generic standards - Immunity for industrial
environments

EN 55011

Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance
characteristics - Limits and methods of measurement

1.3 Approvals

The EKS Electronic-Key adapter with serial interface is certified to

(certificate number 170205 – E240367).

For use and operation as per the

requirements, a power supply for use in class 2 circuits must be used.

1.4 Correct

use

As part of a higher-level overall system, the EKS Electronic-Key adapter is used for access control and
monitoring on control systems (PC/PLC) or parts of control systems for machine installations.

1.5 Incorrect

use

The EKS Electronic-Key adapter is not a safety component in the context of the machinery directive.

Without additional precautions the EKS Electronic-Key adapter must not be used to provide a safety function,
particularly if failure or malfunction of the unit could endanger the safety or health of persons in the operating
area of a machine.

1.6 Obligations on the operating organization

The manufacturer and the organization operating the higher-level overall system, e.g. a machine installation, is
responsible for the observance of national and international safety and accident prevention regulations
applicable in the specific case.