EUCHNER CETx-AP-xxx-AH-xxx (Unicode) - Manual (Page 2)

Operating Instructions Safety Switch CET.-AP-...-AH-...
2
Contents
Scope 3
Correct use 3
Possible combinations for CES components 4
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Function of the electronics 6
Function of the guard locking 8
Mechanical release and mechanical key release (can be retrofitted) 9
Emergency unlocking (can be retrofitted) 10
Escape release (optional) 11
Wire front release (optional) 12
Lockout mechanism (optional) 13
Changing the approach direction 14
Mounting 15
Electrical connection 17
Notes for operation with safe control systems 18
Devices for direct connection IP65 field modules 19
Safety in case of faults 19
Fuse protection for power supply 19
Requirements for connection cables 20
Connector assignment of safety switch CET-AP with 2 x M12 plug connectors, 5-pin and 8-pin 21
Connector assignment of safety switch CET-AP for connection to decentralized peripheral systems
(2x M12, 5-pin, pin 5 not used) 21
Connecting the CET-AP (general) 22
Connecting a CET-AP to a decentralized peripheral system (e.g. ET200 series from Siemens) 23
Setup 24
LED indicators 24
Teach-in function for actuator 24
Functional check 26
System status table 27
Technical data 28
Technical data for safety switch CET.-AP-C..-AH-... 28
Dimension drawing safety switch CET.-AP-... 30
Technical data for actuator CET-A-BWK-50X 32
Ordering information and accessories 33
Versions for connection to decentralized peripheral systems (2 x M12, 5-pin, pin 5 not used) 33
Connection cables for connection to decentralized peripheral systems 33
Accessories 33
Inspection and service 34
Service 35
Declaration of conformity 36