EUCHNER CES-AP-C01-CH (Multicode) - Manual (Page 2)

Operating Instructions Safety Switch CES-AP-C01-CH
2
Contents
About this document 3
Correct use 3
Possible combinations for CES components 4
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Changing the approach direction 7
Mounting 8
Electrical connection 9
Notes on operation with safe control systems 10
Devices for direct connection to IP65 field modules 10
Safety in case of faults 11
Fuse protection for power supply 11
Requirements for connection cables 12
Connector assignment, safety switch CES-AP-C01 12
Connection 13
Connecting CES-AP-...-SB-... (pin 5 not assigned) to a decentralized peripheral system
(e.g. ET200pro series from Siemens) 14
Setup 15
LED indicators
15
Initial setup 15
Functional check 15
System status table 16
Technical data 17
Technical data for safety switch CES-AP-C01-CH 17
Technical data for actuator CES-A-BBA 19
Technical data for actuator CES-A-BPA 21
Technical data for actuator CES-A-BRN 23
Ordering information and accessories 25
Inspection and service 25
Service 26
Declaration of conformity 27