beautypg.com

Discovered devices, Properties tabs, Identify – ETC LED Configuration Software Programming Guide User Manual

Page 9: Dmx address

background image

1

Operation

6

Discovered Devices

When the computer is connected to the network or via USB and the connected fixtures are

turned on, LED Config Tool discovers the fixtures on the network and displays them in the

Discovered Devices pane. To view details about the selected fixture, click the arrow next to

the fixture name.

You select a fixture in the Discovered Devices pane to configure it.

Properties Tabs

The properties of each tab are determined by the Quick Setup that is selected on the Quick

Setup tab.

Identify

Click Identify Fixture to identify the fixture that is selected in the Discovered Devices

pane. The fixture flashes on and off. Click Stop Identify Fixture to stop the identification.

Figure-1.3 Identify and DMX Address panes.

DMX Address

Use DMX Address to assign a DMX address to fixtures. Select a fixture in the Discovered

Devices pane and then enter the DMX address for the fixture. The DMX address is

selectable from 1 to 510.