ETC LED Configuration Software Programming Guide User Manual

Page 20

LED Configuration Software 1.0 Programming Guide

Delay Time

Delay time is the length of time the fixture waits on the previous setting before initiating the

crossfade to the Preset. The default is 0 seconds.

Hue (Vivid, Lustr+, Fire and Ice, Studio HD)

Use Hue to change the overall hue of the Preset. If the Preset is currently active, the

changes made in the Preset Settings pane update to the fixture output immediately.

Saturation

Use Saturation to change the saturation of the Preset color.

Intensity

Use Intensity to change the intensity of the Preset.

Strobe

Use Strobe to change the flashing rate of the Preset. Refer to the fixture’s operation

manual.

Using a Preset

Step 1:

In the Discovered Devices pane, select the fixture that the Preset will be applied

to.

Step 2:

Enter the Preset Number.

Step 3:

Click Play Preset.

Step 4:

To stop the preset, click Stop Preset.

Customizing a Preset

Step 1:

In the Discovered Devices pane, select the fixture that the custom Preset will

be applied to.

Step 2:

Enter the Preset Number.

Step 3:

Edit the Preset values as needed.

Step 4:

Click Record Preset. The customized configuration overwrites the existing

Preset.