ETC LED Configuration Software Programming Guide - Manual (Page 19)

1
Operation 16
Presets and Sequences
Use the Presets and Sequences tab to run a preset color mix or a sequence of presets in
a stand-alone operation when no external control is connected to the fixture. Presets and
sequences override Quick Setups and the Send DMX configuration. When a Preset or
Sequence is stopped, the fixture or fixtures return to the previous configuration.
Figure-1.10 Presets and Sequences tab.
N o t e :
Not all functionality of LED Config Tool may be available for the fixture you are
configuring. Refer to the fixture’s user manual for information about its functionality.
Presets
A Preset is a single, static look or color mix. Only one Preset can be active at a time. As
you edit the Preset Settings, the change is updated live in the fixture’s memory. However,
the change is not saved to LED Config Tool. If you customize a Preset for future use, you
must click Record Preset. To record a preset, the fixture must be in HSI mode. Only one
Preset can be active at a time.
Fade Time
Fade time is the length of time the fixture takes to crossfade from the previous setting to the
Preset. The format is MM:SS. The default is 2 seconds.