Environmental Express AutoBlock Plus User Manual
Page 11
Environmental Express, Inc.
www.envexp.com
11
3.0 SERVICE SCREEN
From the Main Screen, click on the Service Screen button for access to any service related items.
3.1 Reagents Tab
3.1.1 To assign a reagent to a specific port, click the drop-down arrow on the port number and
select the appropriate reagent. The reagent is now assigned to that port.
NOTE: Ports #1 and #6 will always be assigned to DI Water and cannot be changed.
3.1.2 To add a new reagent, click on the “ADD REAGENT” button.
3.1.2.1 Enter the reagent name (20 character maximum).
3.1.2.2 Assign a viscosity to the reagent.
3.1.2.3 Type in any notes in the details field and click OK (25 character maximum).
3.1.3 To delete a reagent, highlight the reagent you wish to delete and click on the “DELETE
REAGENT” button. A pop-up will appear prompting the user to either confirm the deletion or
cancel.
NOTE: The user cannot delete H
2
O as a reagent as this must always be used in the AutoBlock
methods and is always assigned to ports 1 and 6.