Enerpac S-Series - Manual (Page 19)

7 Recommended spare parts
7.1 To order spare parts
Quote the information below when
ordering spare parts:
- The assembly name and serial
numbers.
- The component name and part
number.
- The contract number or
approximate date of purchase.
All item numbers quoted below refer to the
repair parts sheets. For specific
component part numbers refer to the
appropriate bill of materials.
7.2 Seal kit (item 3.0)
- 1 Gland ‘O’ ring
- 1 Piston ‘T’ Seal
- 1 Piston locknut ‘O’ ring - small
- 1 Piston locknut ‘ O’ ring - large
- 1 Rod ‘T’ seal
- 1 Body bush ‘O’ ring
- 2 Swivel manifold pin face ‘O’ rings
- 1 Swivel manifold pin ‘O’ ring
- 2 Swivel manifold block ‘O’ rings
- 1 Manifold retaining clip
7.3 Swivel manifold seal kit (item 2.0)
- 2 Swivel manifold pin face ‘O’ rings
- 1 Swivel manifold pin ‘O’ ring
- 2 Swivel manifold block ‘O’ rings
- 1 Manifold retaining clip
7.4 Spares kit (item 7.0)
- 1 Male coupling
- 1 Female coupling
- 1 Male adaptor
- 1 Body bush retaining ring
- 1 Guard screw (model S1500)
- 2 Guard screws (model S3000)
- 3 Guard screws
(model S6000/S11000/S25000)
- 1 Manifold retaining circlip
- 4 Swivel manifold pin retaining
screws
- 1 Crank pin
- 2 Drive shoe springs
- 1 Reaction arm retainer screw
- 1 Reaction arm retainer spring
- 1 Guard pin (S1500 only)
- 1 Drive shaft holder retaining ring
7.5 Drive shaft button kit (item 5.0)
7.6 Recommended tool kit
S1500
-
1 7/8” spanner
- 1 3/4” spanner
- 1 5/8” spanner
- 1 Circlip pliers
- 1 Seal extraction tool
- 1 14 mm socket
- 1 ø 4 x 20 mm PCD pin spanner
- 1 1,5 mm Allen key
- 1 2 mm Allen key
- 1 2,5 mm Allen key
- 1 3 mm Allen key
ENGLISH
19