ElmoMC Multi-Axis Motion Controller-Maestro Installation Guide - Manual (Page 5)

Chapter 1: Safety Information
In order to achieve the optimum, safe operation of the Maestro Multi-Axis Supervisor, it
is imperative that you implement the safety procedures included in this installation
guide. This information is provided to protect you and to keep your work area safe when
operating the Maestro and accompanying equipment.
Please read this chapter carefully before you begin the installation process.
Before you start, ensure that all system components are connected to earth ground.
Electrical safety is provided through a low-resistance earth connection.
To avoid any potential hazards that may cause severe personal injury or damage to the
product during operation, keep all covers and cabinet doors shut.
The following safety symbols are used in this manual:
Warning:
This information is needed to avoid a safety hazard, which might cause
bodily injury.
Caution:
This information is necessary for preventing damage to the product or
to other equipment.
Note:
This is auxiliary information that ensures the correct operation of the
equipment.
Maestro Installation Guide
MAN-MASIG (Ver 1.33)
1-1