ElmoMC SimplIQ Digital Servo Drives-Guitar Installation Guide - Manual (Page 3)

Revision History
Version Details
1.0 April 2008 Initial release
1.1 July 2008 Heat dissipation data added in Chapter 3
1.2 April 2009 Updated Section 3.8.3; added Section 3.16
1.3 March 2010 MTCR 01-010-01: Updated Figure 22
1.4 July 2010 Updated Sections 3.4 and 4.1.8
1.5 July 2012 Formatted according to new template
“Metronome” was replaced by the “Composer” software.
1.501 February 2013 Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.502 March 2013 The maximum auxiliary supply voltage was added to the
Power Ratings table
General document updates
1.503 March 2013 The Power Ratings table (Section 4.3) was updated.
1.600 June 2013 Addition 20/200, R75/48, and R75/60 models
1.601 July 2014 General format changes