ElmoMC ExtrIQ Gold Line Servo Drives-Gold Tiger - Manual (Page 37)

Gold Tiger Installation Guide
MAN-G-TIGIG (Ver. 1.000)
||Port A| www.elmomc.com
37
Table of Contents
6.4.1 Incremental Encoder
The following figure describes the connections at Port A for the Incremental encoder.
Figure 19: Port A D-Type Incremental Encoder Input – Recommended Connection Diagram
6.4.2 Hall Sensor
The following figure describes the connections at Port A for the Hall Sensor.
Figure 20: Hall Sensor Connection Diagram