ElmoMC ExtrIQ Gold Line Servo Drives-Gold Tiger - Manual (Page 25)

Gold Tiger Installation Guide
MAN-G-TIGIG (Ver. 1.000)
||Basic Recommendations| www.elmomc.com
25
Table of Contents
6.1.3 Feedback Cable Port C Connector
At the controller side connections, follow the controller manufacturer’s recommendations
concerning the shield.
The connection of the Drain wire to the Port C is not mandatory.
Figure 9: Feedback Port C Cable Assemblies
6.1.4 IO Cable Connector
It is recommended to use shielded cable, but is not mandatory.
Figure 10: Feedback IO Cable Assemblies