ElmoMC ExtrIQ Gold Line Servo Drives-Gold Panther - Manual (Page 19)

Gold Panther Installation Guide
MAN-G-PANIG-EC (Ver. 1.000)
|Integrating the Gold Panther on a PCB| www.elmomc.com
19
Table of Contents
4.4. Integrating the Gold Panther on a PCB
The Gold Panther is designed to be mounted on a PCB, either by soldering its pins directly to the
PCB. Refer to the Gold Line Trombone Design Guide MAN-G-TROIDG for further information.
4.5. Connection Diagrams
There are two connection diagrams for EtherCAT and two for CAN that show the two different ways
of connecting the power supply:
• 400 V and 800 V S or T -models (the catalog number has an S or T suffix) that feature backup
functionality and require an auxiliary 24 V backup supply. The drive will not be operative
without the external 24 VDC supply.
• 400 V model without backup functionality (0 or 1 suffix). The drive’s internal DC/DC converter is
fed from the VP+ and VN- of the internal drive’s bus line.