ElmoMC ExtrIQ Gold Line Servo Drives-Gold Hawk - Manual (Page 26)

Gold Hawk Installation Guide Installation
MAN-G-HAKIG (Ver. 1.001)
www.elmomc.com
26
4.3.2.4. Connector J2
Feedback A/B/C, Digital Halls – see
Section
4.9.
Analog Inputs – see Section 4.9.4.
RS-232, EtherCAT, USB – see Section 4.11.
Connector Type: 1.27 mm pitch 0.41 mm
sq
Note regarding the EtherCAT and CAN communication options:
The J2 Connector exports all supported communication links. However, note that CAN and
EtherCAT are not available in the same version of the Gold Hawk and are thus not operational
simultaneously. See the part number diagram in Section
4.2 above for the different Gold Hawk
configurations.
Pin (J2) Signal Function
1 PortA_ENC_A+ /ABS_CLK+ Port A- channel A/ Absolute encoder clock+
2 PortC_ENCO_A- Port C- channel A complement output
3 PortA_ENC_A-/ABS_CLK- Port A- channel A complement / Absolute
encoder clock-
4 PortC_ENCO_A+ Port C- channel A output
5 PortA_ENC_B+/ABS_DATA+ Port A - channel B/ Absolute encoder Data+
6 PortC_ENCO_B- Port C - channel B complement output
7 PortA_ENC_B-/ABS_DATA- Port A - channel B complement / Absolute
encoder Data-
8 PortCENCO_B+ Port C - channel B output
9 PortA_ENC_INDEX+ Port A – index