ElmoMC ExtrIQ Gold Line Servo Drives-Gold Solo Hornet - Manual (Page 30)

Gold Solo Hornet Installation Guide (EtherCAT and CAN) Installation
MAN-G-SOLHORIG-EC (Ver. 1.009)
| www.elmomc.com
30
Table of Contents
Pin (J3) Signal Function
Pin Positions
Table 6: Communications Pin Assignments
4.3.3. EtherCAT Indicators
4.3.3.1. EtherCAT Link Indicators
The Gold Solo Hornet can serve as an EtherCAT slave device.
The green LED is the link/activity indicator. It shows the state of the applicable physical link and
the activity on that link.
The possible states of these LEDs are summarized in Table 7.
LED State Meaning
Link/Activity Off No link is established.
On A link is established.
Blinking There is data transmission activity.
Table 7: LED States
4.3.3.2. EtherCAT Status Indicator
The EtherCAT status indicator is a red/green dual LED. It combines run indication (when it is
green) and error indication (when it is red) of the EtherCAT device. For further details, see the
EtherCAT Manual.