How to use this guide – ElmoMC ExtrIQ Gold Line Servo Drives-Gold Solo Hornet User Manual
Page 19
Gold Solo Hornet Installation Guide (EtherCAT and CAN)
Product Description
MAN-G-SOLHORIG-EC (Ver. 1.009)
19
2.4. How to Use this Guide
In order to install and operate your Elmo Gold Solo Hornet servo drive, you will use this manual
in conjunction with a set of Elmo documentation. Installation is your first step; after carefully
reading the safety instructions in the first chapter, the following chapters provide you with
installation instructions as follows:
•
Chapter 3 - Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Gold Solo Hornet.
•
Chapter 4 - Technical Specifications
, lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Gold Solo Hornet servo drive should be
successfully mounted and installed. From this stage, you need to consult higher-level Elmo
documentation in order to set up and fine-tune the system for optimal operation.
•
The Gold Product Line Software Manual, which describes the comprehensive software used
with the Gold Solo Hornet
•
The Gold Product Line Command Reference Manual, which describes, in detail, each
software command used to manipulate the Gold Solo Hornet motion controller
•
The Elmo Application Studio Software Manual, which includes explanations of all the
software tools that are part of the Elmo Application Studio software environment.