DIGIWEIGH DWP-C2X - Manual (Page 6)

3
This function is optional (check details in 7
th
section parameter setting). When the weighing is
continually stable or at Zero status for 15 minutes, it enters into power saving mode, each digit on
display shows "_" one by one. When button or weighing changes it automatically returns to normal
weighing display
After 60 minutes continual steady weight, it will automatically cut off the power and shutdown.
5.2 Maintaining and lifting the weight display
Press button (H) to hold the
display which won’t change when real weight changes. Press (H) again to
life the display, enters into normal weighing process.
5.3 Tare ( Zero)
5.3.1 Tare ( Zero)
In the "Tare" off state, life the goods and press the "Tare On/off" button or the
【→0←) on the remote,
the scale will remove the weight and display will only show"0" or "0.0"
①If the weight is ≤10%F.S, Zero it(whatever the weighing is stable or not), it shows "0" and the "Tare"
light off
②if the weight is >10%F.S and the weighing is stable then tare it, shows "Zero" and press "Tare". If the
weighing is not stable then nothing needs to be done.
5.3.2 9 seconds to automatically tare delay
Press" Tare On/Off" button for one second, showing"tAr-9", and release the button; reduce value by 1
per second speed display. If the weighing is not stable ,it will show"-----" for waiting; When it becomes
stable, it will tare automatically, and shows" Zero" with the "Tare" indicating light on (if the weight ≤10%
or 2%F.S, Zero it and it will show"0" with "Tare" indicating light off). If the display value reduces by 1 per
second
showing” tar-x", press” Tare On’/off"" button, it will start measuring the voltage and showing the
value, and shutdown automatically by releasing the button
In the state of " Tare" (with the tare light on"), press the button" Tare On/Off" or the" button on the
remote, tare clearance and it will show the gross weight , and quit " tare"("Tare" indication light off)
5.4 Check (Look back) the past 5 weighing records
The green button at the front panel of the scale is for checking. Press once for the latest display,
(Showing LSt-1 for one second and the value for 4 seconds) twice for second latest display, and so on.
It will show max.5 records at one time by pressing the button. It returns to weighing status 5 seconds
after checking the record.
In the state of"
checking”, press" Tare On/off" to quit “checking weight value" immediately and return to
the weighing status.
5.5 Net weight accumulation
When the auto accumulation function is off and the net weight (>20d) display becomes stable, press
(*)to manual accumulate the net weight and it will show "n xy" and return to weight status in 2 seconds.
N stands for net weight accumulation, xy stands for times of accumulation. Next net weight
accumulation will only be
after the net weight showing value ≤20d (empty). Max.99 times
When the auto accumulation function is on, it will automatically accumulate when the display value
becomes stable. Next net
weight accumulation will only be after the net weight showing value ≤20d