DIGIWEIGH DWP-PJ-P - Manual (Page 8)

DW-PJ Pallet Jack Scale
- 7 -
4.4 Continuous ASCII RS-232 data output format
4.4.1 Automatic Output
4.4.1.1 Address: Adr = 00
The ASCII data format is
“=,X1,X2,
X3,X4,X5,X6
”
=，X1 , X2, X3 , X4, X5, X6
X1, X2, X3, X4, X5, X6 is weight data.
If the weight is 〖 100.00〗kg, the continuous output is = 00.001 = 00.001=
4.4.1.2 Address: Adr = 99
The ASCII data format is
“=,X6,X5,X4,X3,X2,X1”
=，X6 , X5, X4 , X3, X2, X1
X6, X5, X4, X3, X2, X1 is weight data..
If the weight is 〖 100.00〗kg, the continuous output is = 100.00 = 100.00=
4.4.1.3 Manual and Automatic Printing Output
Address: Adr = 01
—98
5 Power
In power off states, press 【ON】 key turn on the indicator . The indicator will check the
LED and display battery capacity〖bPt 82〗for 1.5 second.
6 Configuration
Connect load cells to the indicator and set following configuration parameters
Step Operation Displaying Contents
1 Press
【→0←】
【ON】
Self test from
〖UEr 7.9〗〖0〗to
〖9〗〖 0〗
In power off states, press 【→0←】key and
【ON】 turn on power, segment check, and display
〖UE
—7.9〗edition No 1.5 second.
Press【﹡】
Press【﹡】
〖CAL SP〗
〖-SEt-〗
Enter of the scale
Enter the configuration setting modal
Press【→】 〖d 1〗 The number of scale divisions selected
3 Press【↑】
Press【↑】
〖d 2〗
〖d 0.1〗
0.001-0.002-0.005-10-20-50-100-200-500-0.10-0.20-
0.50-0.010-0.020-0.050-1-2-5-0.1-0.2-0.5-0.01-0.02-
0.05 For example：d = 0.1
4 Press【﹡】
Press【→】
Press【→】
Press【→】
Press【↑】
Press【↑】
〖 6000〗
〖000000〗
〖001000〗
Sets scale F·S