DIGIWEIGH DWP-98D - Manual (Page 8)

22. UNIT PIECE WEIGHT INDICATOR /pcs
The value left to it is the unit piece weight. This indicator remains visible
during normal operation status.
23. INSUFFICIENT SAMPLE WEIGHT CARNING INDICATOR
Visible when total weight of the sample size is below satisfactory level. If
possible, increase the sample quantity unit this indicator disappears.
24. INSUFFICIENT UNIT PIECE WEIGHT CARNING INDICATOR
Visible when the unit piece weight of the sample is below satisfactory level.
If possible, increase the sample quantity.
25. QUANTITY INDICATOR (pcs)
The value left to it is the quantity of the current transaction. This indicator
remains visible during normal operation status.
26. QUANTITY CHECK RESULT INDICATORS
 HI = Quantity is higher than the HI limit set.
 OK = Quantity is in between than the low and HI limits set.
 LO = Quantity is lower than the LO limit set.
A. WEIGHT PANEL
Weight value is shown here.
B. UNIT PIECE WEIGHT PANEL
Unit piece weight is shown here.
C. QUANTITY PANEL
Quantity value is shown here.
D. BUBBLE LEVEL
Refer to this bubble to obtain a horizontal position for the instrument.
E. DC JACK INPUT
External power adaptor is plugged in here right below the scale
F. RS232 COMPORT
9 pin (DB9) RS232 interface output for connection with computer and other
peripherals.