DIGIWEIGH DWP-98D - Manual (Page 19)

displayed on the corresponding panels,
To start a new sampling, repeated step a to f above
6.7 MEMORY ACCUMULATION FUNCTION
6.7.1 To Accumulate a Transaction to Memory
a. When quantity is being displayed on Quantity Panel, press [M+] to
and accumulate data of current transaction to memory,
b. The instrument: -

displays
“ACC n” on Quantity Panel. ACC denotes data has
been accumulated to memory. Arrow point to ACC is shown.
n donates the number of transactions which have been
accumulated to memory.

displays total accumulated value (total weight and total quantity)
on Total weight panel and Unit Weight Panel.

output transaction printout(s) through the RS232 comport. The
instrument returns to normal operation status after 2 seconds if
the RS232 setting is manual and ACC is on
c. Repeat a for subsequent transactions
6.7.2 Memory Recall and Clearance
a. Remove all loads from platter,
b. Press [MR] to recall total accumulated weight from memory,
c. The instrument displays: -
Display
“ACC n” on Quantity Panel. ACC denotes data has been
accumulated to memory. Arrow point to ACC is shown; n donates the
number of transactions which have been accumulated to memory.
Displays total accumulated value (total weight and total quantity) on
Total weight panel and Unit Weight Panel.
e. Press [M+] to print out the accumulate result if the RS232 setting is
manual and format=2
d. At this point: -
 Press [ZERO] to quit or,
 Press [CE] to clear memory, then [ZERO] to return to normal
operation status.