DIGIWEIGH DWP-98D - Manual (Page 11)

4.3.1. Connecting with a Computer or Mini printer
4.3.2. Connecting secondly platform
5. INITIAL SETUP
5.1 INTERNAL SETTINGS
Preferred application parameters can be checked or set through internal
functions. Refer to 5.4 for internal function description and setting
procedures.
5.2 HOW TO ENTER AND SELECT INTERNAL FUNCTION
Follow the below steps to enter and select desired parameter of an internal
function.
a. Turn the instrument off and on again
b. Press [TARE] during countdown,
c. The instrument displays RS232
d. Hit [RECALL] to go to CAL then hit [TARE]
e. Enter password when P---- appears
“0000”
f.
”The instrument is now in internal function,
5.3 KEY FUNCTION DURING INTERNAL FUNCTION SETTING

[TARE] = Enter, save and return,

[M+] = Quit without saving,

[CHECK] = Go next,

[RECALL] = Go previous,

[CE] = Clear,