DIGIWEIGH DWP-800 DWP-102E Indicator User Manual
Page 8
- 7 -
SECTION 5 RS-232 OUTPUT
Specifications: RS-232 output of weighing data, 1200/2400/4800/9600/19200 bps,1 stop bit, 8 data bits, No Parity.
Mode 1: Continue output
ST,GS 0.119,kg
ST for stable; US for unstable ; GS for gross weight; NT for net weight ; 0.119 for weighing value; kg for unit (kg, lb); HEX 0d and HEX oa : HEX
for hex; 0d for enter; 0a for next line.
Mode 2: Automatic output
Automatic output mode is same as continue output. The only difference is:
After weighing, when take away the goods display returns to zero, then transfers.
Data Format for normal weighing operations. Examples as follow:
Mode 3: Print. Setting Lab2
SECTION 6 ERROR CODES
ERROR
CODES
DESCRIPTION
RESOLUTION
- - OL - -
Over range
Remove weight from the scale.
Err 1/Err 2
Date and Time not right
Reset again.
Err 4
Zero Setting Error
The scale was outside the normal zero setting
range either when it was turned on or when
the ZERO Key was pressed. Remove weight
from the scale and try again. Use the TARE
Key to set the display to zero value.
DATE 2000/02/11
TIME 21:26:56
NO. 001
TARE 0.000kg
NET 0.076kg
GROSS 0.076kg
DATE 2000/02/11
TIME 21:27:41
NO. 002
TARE 0.125kg
NET 0.035kg
GROSS 0.160kg
----------------
NO. 002
TOTAL 0.111kg