Despatch LBB2-xxA/B-1 - Manual (Page 57)

LBB Series Oven Owner’s Manual
A PPENDICES
Version 15 57
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
8.2. Optional Equipment
8.2.1. Assemble Oven Stand
1. Install four rubber grommets into holes in the stand (Figure 25).
a. For LBB1-69 stands, the rear grommets mount into the forward set of rear holes.
b. On LBB2-12 stands the rear grommets mount into the set of holes closest to the rear
of the stand.
2. Place the oven on top of the stand. The four embossed areas in the bottom of the oven should
center in the grommets.
3. Using the self-drilling screw and large flat washer provided, install through each embossed
area as shown below.
Figure 25. Optional LBB Oven Stand.