Despatch Protocol Manager with Protocol Plus User Manual
Page 31
Protocol Manager Software E-100
27
Reading/Writing a Recipe to/from a Controller
1.
Select the controller from the box at the bottom right corner of the Recipe
Editor screen. See Figure 25. Only controllers that are currently enabled and
Online will be listed in the box.
Figure 25: Read/Write Area, Recipe Editor Screen
2.
Select a profile (1 through 8) to be read/written from/to the controller.
3.
Press the READ or WRITE button to either call up the recipe from the
selected controller, or write the current recipe to the selected controller.
NOTE: Reading the parameters from a controller will overwrite any information stored in
the displayed recipe.