Despatch Protocol Manager with Protocol Plus - Manual (Page 20)

Protocol Manager Software E-100
16
2. Click Yes to save settings.
Software Setup: Passwords Setup
The fourth tab from the left on the Software Setup window is the Passwords tab.
Press this tab to bring up its screen. See Figure 15.
Three levels of passwords may be set at this screen, which controls the software login
level. The highest level, Level 4, enables the user to change communication settings,
add/delete controllers from the network, change passwords, and perform all lower-level
operations.
The next highest login level, Level 3, enables the user to edit/write recipes, configure
data log settings, and perform all lower-level operations.
The next login level, Level 2, enables the user to change controller modes, select
profiles, change set points, start data logging, and perform Level 1 operations.
The lowest login level, Level 1, allows the user to view run-time status, and start, stop
or hold controller operation. No password is required.
Figure 15: Protocol Manager Setup - Passwords Screen