Tally dascom 1225 – Dascom 1225 User Guide User Manual

Page 50

Tally Dascom 1225

【

Tear Off】key: Decrease 0.5mm

【

Load/Eject】key: Increase 0.5mm

5. Press

【

LF/FF】 key, printer will print “Save settings？Yes”. Press 【Load/Eject】 key to choose Yes

or No，then press 【LF/FF】 key to confirm selection and exit “Adjust Page Margins” mode by pressing
【

Online】. The print head moves to the left side and the printer beeps twice, then the print head

moves to the middle position.

Adjust Tear-Off Position Procedure:

1. Enter the Adjust Page Margins function by holding down the【Load/Eject】and【Online】keys while

powering up until the printer beeps twice.

2. Load fanfold paper

3. The printer will print as below:

Adjust Page Margins:
【

LF/FF】=OK 【Tear/Off】= Back 【Load/Eject】= Next 【Online】= Exit

Current Setting: Adjust Fanfold Top Margin

4. Press【Load/Eject】key until the current setting is “Adjust Tear-Off Position”. Press【LF/FF】key to

confirm selection. The printer will print as follows:
Procedure：

Install fanfold paper to tractors
【

LF/FF】 = Add 【Load/Eject】 = Reduce 【Online】 = Exit

Each step is 0.5 mm

Function of keys:
【