Tally dascom 1225 – Dascom 1225 User Guide User Manual

Page 32

Tally Dascom 1225

Calibrate PE
sensor
sensitivity

{S1}+[S2] -

 Out-of-paper: Beeps once. Automatically loads a form in 10

seconds.

 Paper loaded: Calibrates PE sensor with paper loaded and

save the sensitivity value. Beeps 5 times when completed.

 [NOTE: There are 2 independent sensors for rear tractor and

front friction.

Restore default
PE sensor
sensitivity

[S2]+{S4}

Resets PE sensor sensitivity to factory defaults. Beeps twice
when completed.

Clear Buffer and
Reset

{S1}+[S5]

 Clears the print buffer. Beeps once upon completion.
 Pressing S1 longer initializes the printer to default settings.

Beeps 3 times upon completion.