Dascom 1225 User Guide - Manual (Page 33)

Tally Dascom 1225
19
Power-On State
Function
Name
Switch
Operation
LED Function Description
Menu Setup /
EDS [S2] - Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
Hex Dump [S4] - Beeps once to indicate going into hex dump mode:
 Prints data from host in hexadecimal representation.
 Pressing S4 suspends the printing.
 When the hex dump has finished, pressing S4 forces the
printing of the last line of data, as any line termination
control code from host has no function.
 Pressing S1 can change the font.
 Switch off the power to terminate the hex dump.
Self Test /
Status Page [S5] - Prints the printer settings and self-test pattern.
Pressing S1 can change the font.
Service Menu [S2]+[S3] - Vertical Alignment, Change Pin Function and Endless Self
Test
Adjust Page
Margins [S4]+[S5] - Includes Adjust Fanfold Top Margin, Adjust Single Top
Margin, Adjust Fanfold Left Margin, Adjust Single Left
Margin and Adjust Tear-Off position.