Dascom 1225 User Guide - Manual (Page 34)

Tally Dascom 1225
20
Restore Factory
Defaults [S1]+[S2]+[S4] - Restore settings to factory defaults except for Change Pin,
Vertical Alignment and Adjust Page Margin Parameters.
Firmware
Update [S2]+[S3]+[S4]+
[S5] -  Alternate flashing of L9 and L10 indicates ready for
firmware update from host.
 When new firmware is being received: L1 and L2 will
flash, followed by L1 and L3 flashing, then followed by L1
and L4 flashing.
 When downloading is completed, the carriage returns to
home position. Printer initializes normally.
Language
Setup
[S3]+[S4]
 Allows user to select one of the following languages:
English, German, Russian, Italian, French, Spanish and
Turkish. Factory default is English. Refer to Language
Setup section below for details.
Language Setup
The panel menu can display the following languages: English, German, Russian, Italian, French, Spanish and
Turkish. Factory default setting is English. To change it to another language, hold down the [LF/FF] and
[Load/Eject] keys on the panel and power-on. Upon exiting the Language Setup Menu, a listing of the current
configuration is printed, and this is followed by Main Menu Setup.
Below is an example of changing from English to German language: