Dascom 1225 User Guide - Manual (Page 38)

Tally Dascom 1225
24
Auto Tear Manual, 0.5s, 1s, 2s, 3s, 4s, 5s
Specifies the waiting time before feeding the
page to tear-off position automatically. Manual:
Auto tear mode is off. (Applies to tractor mode
only)
Interface Setup
Interface
Setup
Valid Settings Function
Interface Auto, Parallel, USB
For multi-host connection. Auto: First come first served;
Parallel/USB: Serves the designated host only.
RAM Usage User Font, Buffer
User Font: Part of RAM is used for user download characters;
Buffer: Disables user character download function; uses RAM for
expanded buffer size up to 48KB.
I-PRIME Yes, No Yes: Host I-Prime signal resets the printer.
Auto IF
Delay
10s, 30s
Determines the waiting time before receiving data from another
interface.
Advanced Setup
Advanced Setup Valid Settings Function
Auto Load Manual, 0.5s, 1s, 1.5s, 2s
Specifies the waiting time before loading a cut
sheet automatically. Manual: Auto load mode is
off. (Applies to friction mode only)
Paper Jam
Prevention
Yes, No
Flattens paper edges by carriage movement
before printing starts.
Paper End Detect Yes, No
Yes: Detects paper out and halts printing;
otherwise, ignores paper out and continues
printing.
Form Length Ctrl Software, Ignore Ignore: Ignores form length commands
Pitch Ctrl Software, Ignore Ignore: Ignores CPI commands
Font Ctrl Software, Ignore Ignore: Ignores font select commands
Quality Ctrl Software, Ignore Ignore: Ignores print quality commands
Buzzer Yes, No Yes: Sounds buzzer on all hardware errors