Tally dascom 2610 – Dascom 2600 User Guide User Manual
Page 56
![background image](/manuals/557379/56/background.png)
Tally Dascom 2610
43
Pap.back
Pap.back=normal
Pap.back=dark
Pap.back=normal is the standard for
normal paper.
Pap.back=dark can be set to process
paper with a grey back.
Paper with a completely black back side
cannot be used if the ink is
carbon-based. However, the printer can
handle aniline- based black paper
(undefined colors).
Hvy Form
HvyForm=ON
HvyForm=OFF
If you set HvyForm=ON, the printer
prints the same line twice at double
strike. This setting ensures that copy
paper produces optimum results.
SerialN
factory set
With the SerialN function you have the
possibility to change the 12 digit serial
number of the printer. The number can
be written with any ASCII character
between hex 20 and hex 7E.
LED Panel: The Serial Number cannot
be set via menu instead you need to use
the WebPanel.
AssetN
10 digits empty
With the AssetN function you have the
possibility to change the 10 digit asset
number of the printer. The number can
be written with any ASCII character
between hex 20 and hex 7E.
LED Panel: The Asset Number cannot
be set via menu instead you need to use
the WebPanel.
GrSpeed
GrSpeed=Normal
GrSpeed=High
This parameter allows improved Graphic
Speed independently to the driver. It
affects only the print speed of graphic
printouts at 180 x 180 dpi.
Jobcntl
Jobcntl=On
Jobcntl=Off
This parameter activates the printer
language PJL (Printer Job Language) in
connection with the internal Ethernet
interface (ETH-INT) or the external
TallyCom
III interface (ETH-EXT)
.
UltraDr
UltraDr=on
UltraDr=off
Ultra Draft=on, speeds up 17.1 and 20
cpi. Precondition is HS-Draft needs to be
activated.