Dascom 2600 User Guide - Manual (Page 100)

Tally Dascom 2610
87
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
√ √ √ √ Double-wide printing ON
√ √ Set character spacing
√ √ t Select character set
√ √ √ √ T Superscript or subscript OFF
√ √ √ √ U Unidirectional print ON/OFF
√ √ Un Unidirectional print ON/OFF
√ √ √ √ W Continuous double width ON/OFF
√ √ w Double height print ON/OFF
√ √ x Set print quality (PQ)
√ √ x<0> sets Draft or HS-Draft
√ √ x<1> sets LQ or NLQ
√ X Font selection according to pitch and points
√ √ X Set left and right margin
√ √ √ √ Y Set graphics print to 120 dpi
√ √ √ √ Z Set graphics print to 240 dpi
√ * * * * +F Assign character set G3
√ * * * * | Character generator LS3R
√ * * * * } Character generator LS2R
√ * * * * ~ Character generator LS1R
√ √ √ √ √ Form feed
√ √ √ √ √ Horizontal tab jump
√ Set tab stop at actual horizontal position
√ Line feed without CR
√ √ √ √ √ Line feed
√ Line feed with CR
√ Half step line feed
√ Half step line feed back
√ Line feed without CR back
√ √ √ √ Condensed printing of 17.1 cpi ON
√ Switching the character generator (SS 3)
√ √ √ √ Double-wide printing ON
√ Switching the character generator (SS 2)
√ √ √ √ √ Vertical tab jump
√ Set tab stop at current vertical position