Dascom 2600 User Guide - Manual (Page 31)

Tally Dascom 2610
18
◆ Keys
1) 【 Online 】
a) Every press on this switch toggles the status between Online and Offline. When the printer is
Online, it receives data from the host; while it is Offline, it stops the printing and signals the host to
stop sending data.
b) Press the key
【 Online 】 for the below operations:
 Before and after special setup: Most of the special setup requires Offline operation. A
press on 【 Online 】 key brings the printer Offline to carry out the special setup; after that,
pressing 【 Online 】 brings the printer back online.
 Halt the printing for error recovery: Pressing 【 Online 】 brings the printer Offline for error
recoveries like paper jam and so on. After the recovery, press 【 Online 】 to continue the
printing.
2) 【 Load/Eject 】
If paper is already loaded:
Single sheet - - > The printer ejects the paper;
Tractor front and rear - - > The printer moves the paper in to Park position.
If paper is not loaded:
Transport the paper to the first print position (TOF).
3) 【 Speed 】
Toggles between high speed and high quality print depending on menu settings.
4) 【 Tear 】
When fanfold stationery are installed in an active tractor path, a press of this key advances the
perforation of the stationery to the cutting edge of the tear-bar. This key is invalid for cut sheets
and Top Pull Tractor.