Dascom T2265+ Quick Installation Guide Cutting Device - Manual (Page 27)

Quick start guide Technical data and paper specifications
25
ENGLISH
Technical data and paper specifications
` Cut device
Cut width 400 mm (15.75")
Cut height minimum form length 63.5 mm (2.5")
Cut duration 1000 ms ± 10%
Cutting accuracy 1 to 2 sheet-sets, ± 1 mm
≥ 3 sheet-sets, ± 2 mm
(depending on the stiffness of the cross perforation)
Cut device activation manually via the control panel, setting via the Setup
Menu, via interface
Service life appr. 1 000 000 cuts
Weight appr. 4 kg
Paper type only fanfold paper can be cut
QSG2280+2380_Cutdevice_en.fm Seite 25 Donnerstag, 20. März 2008 3:22 15