Dascom T2265+ Quick Installation Guide Cutting Device - Manual (Page 14)

Installation Quick start guide
12
Now turn the cut device all the way down.
Place the two paper supports onto the track at the front of the
device. From the side attach the supports one after another to
the track. Adjust the supports in such a way that the paper is
positioned perfectly.
Individual sheets of e.g. multi-part forms (if crimped – punch printing on edge of
sheet) can be prevented from blocking the printer, by reducing the distance
between the paper guides.
QSG2280+2380_Cutdevice_en.fm Seite 12 Donnerstag, 20. März 2008 3:22 15