Condux Running Line Tensiometer - Manual (Page 4)

4
General Information
General Product Use
A. The Condux Running Line Tensiometer, used with the Condux CableGlider® cable
puller (or other rope capstan pullers) will give accurate measurements of the force
exerted on a cable as it is installed. It consists of two components: the Mechanical
Sensing Unit (which mounts directly to the cable puller) and the Electronic Control
Box.
!CAUTION: Electronic Control Box and Mechanical Sensing Unit are specifically
calibrated as sets. Sets are identified by matching the last three serial number digits on
each unit. Mixing non-matching units will result in faulty operation.
Operator Qualifications
A. Operator must know the required safety directives to run the product that are pertinent
to the country where it is being used.
B. Operator in charge of the product and installation project must be appropriately
dressed, avoiding large clothes, hanging jewelry or whatever might become entangled
in the moving parts
C. Operator must also wear the necessary protective equipment such as gloves, boots,
helmet, etc.
D. Operator must carefully follow all advisements contained in the instruction manual or
on the machine
Operator must have work area kept clean of obstacles that might inhibit a safe working area.
Maintenance Qualification
A. Periodically inspect product for wear and tear.
B. Authorized and trained personnel must do all maintenance operations. Trained
personnel are defined as people who have received qualified training from the using
company or from the manufacturer
1