Comelit MT 3451 FR - Manual (Page 19)

19
ENTER NAMES
CHANGE NAMES
DELETE NAMES
CLEAR ALL NAMES
OK OK
SCROLL CANC
M_
OK
ESC CANC
M_
OK
ESC CANC
M_
OK
ESC CANC
TROVA PASSWORD:
_ _ _ _ _ _
OK CANC
SEARCH PASSWORD:
883466
OK
ESC CANC
TROVA PASSWORD:
_ _ _ _ _ _
OK CANC
SEARCH PASSWORD:
883466
OK
ESC CANC
EN
1.1.3 CLEAR ALL NAMES
"Clear all names" can be used to remove all names and the data
associated with them.
1. Access programming mode, see page 17.
2. Select data management/names/clear all names by scrolling
through the menu using and pressing or to confi rm.
3. Press to confi rm deletion or press to exit.
4. Press to start searching.
5. Scroll using and/or press or to confi rm the name
you wish to remove.
6. Press to exit.
6. Change the password and press to confi rm.
7. Press to exit.
3b. Enter the name to which the password you wish to change
is assigned (in full or just the fi rst letter).
4b. Press to start searching.
5b. Scroll using and/or press or to confi rm the
selected name.
ONLY WITH "ACCESS CONTROL" ENABLED (see section 2.6)
1. Access programming mode, see page 17.
2. Select data management/passwords/change by scrolling
through the menu using and pressing or to confi rm.
3. Enter the name to which you wish to assign the password
(in full or just the fi rst letter).
4. Press to start searching.
5. Scroll using and/or press or to confi rm the
selected name.
4a. Press to start searching.
1.2. Password
1.2.1 ENTER PASSWORD
1.2.2 CHANGE PASSWORD
1. Access programming mode, see page 17.
2. Select data management/passwords/enter by scrolling through
the menu using and pressing or to confi rm.
6. Enter the password (max. 6 characters).
7. Press to confi rm or press to exit.
ONLY WITH "ACCESS CONTROL" ENABLED (see section 2.6)
ONLY WITH "ACCESS CONTROL" DISABLED (see section 2.6)
The password must be at least 4 characters long
The password must be at least 4 characters long
3a. Enter the password you want to change.
Password entry makes it possible to activate the door lock relay.
1. Access programming mode, see page 17.
2. Select data management/passwords/delete by scrolling
through the menu using and pressing or to confi rm.
3b. Enter the name to which the password you wish to delete
is assigned (in full or just the fi rst letter).
4b. Press to start searching.
5b. Scroll using and/or press or to confi rm the
selected name.
4a. Press to start searching.
1.2.3 DELETE PASSWORD
ONLY WITH "ACCESS CONTROL" ENABLED (see section 2.6)
ONLY WITH "ACCESS CONTROL" DISABLED (see section 2.6)
3a. Enter the password you want to delete.
1. Access programming mode, see page 17.
2. Select data management/passwords/clear all by scrolling
through the menu using and pressing or to confi rm.
3. Press to confi rm deletion or press to exit.
1.2.3 CLEAR ALL PASSWORDS
6. Press to delete the password.
7. Press to exit.