Comark RF500A - Manual (Page 6)

5
Check Packed Items
Please confirm that the kit contents are all present and correct. If you believe any parts are missing or damaged
please contact Comark or your local Distributor to arrange replacements.
Software and USB drivers are no longer provided on CD and can be downloaded free of charge from our website.
See “RF500A-CONFIG - RF500A Configuration Utility” {Page 13} for instructions on how to download and install the
software and drivers.
RF500A Gateway
The RF500A Gateway is available in two variants:
• RF500A Standard
• RF500AP Power over Ethernet enabled
The actual Gateway model is indicated on the side label by a check
mark adjacent to the model code.
The RF500A and RF500AP Gateway Kits consist of the following items:
• RF500A Gateway Part No. RF500A or RF500AP
• Transmitter Activator Part No. RF525
• High Gain Antenna Part No. RF504
• AC Adaptor with Mains Lead with either UK, EU or US plug
• Ethernet Cable
• USB Cable (Required for configuration only)
RF500 Transmitters
RF512, RF513, RF515 & RF516 transmitters are packed with a mounting bracket and 2-tie-wraps.
RF542 transmitters are additionally packed with:
1x RF520 AC Adaptor including regional mains plug attachment
1x Cat5e Ethernet Cable
1x RF525 Transmitter Activator
1x RF542 Quick Reference Guide
ON / OFF AUX
STATUS
1 2 3 4
RF500A
SERIAL
No.
Comark Instruments, 52 Hurricane way,
Norwich, Norfolk, NR6 6JB. UK
Tel: 01603 (+44 1603) 256647
Email: [email protected]
www.comarkltd.com
Comark Instruments, PO Box 9090,
Everett, WA 98206, USA
Tel: (503) 643 5204
Email: [email protected]
www.comarkUSA.com RF500AP
MADE IN UK
FOR INDOOR USE ONLY
DO NOT MOVE WHEN
IN OPERATION