Comark RF500A - Manual (Page 21)

20
Setup of First Administrator
As shipped, the Gateway has no users configured except for a special “one-time-use” installation user which enables
an installer to add the main Administrator to the Gateway. Thereafter this Administrator’s username is used to perform
all subsequent commissioning.
1. At the Gateway user login screen, type the username “comark” and click Enter .
2. At the password screen enter “42” and click Enter .
3. You will be logged into the Gateway as the installation user.
4. The Gateway will inform you that “You are about to commission a new system”.
5. Click on the Enter Administrator Details button.
6. When the Add 1st Administrator screen appears, fill in the fields with the username and password of your
choice.
7. In the top left box, marked “Password Required”, enter the installation password: ”42” and then click the
Submit button.
8. If successful the Gateway will return the message “New user added”.
9. Click the OK button to return to the Gateway user login screen.
10. Login as the new Administrator you just created.
Gateway Language
The language the Gateway uses in web pages and in emails can be changed as follows:
1. Click the Administration button then the Language button.
2. Click the radio button below the flag corresponding with your choice of language. Enter your password and
click the Submit button.
The language selected is used immediately for all web pages and emails generated for all users.