Comark RF500A User Manual
Page 14
13
RF500A-CONFIG - RF500A Configuration Utility
Each Gateway is shipped with a default
IP address
of 192.168.25.220. The Gateway IP address must be changed to
the Static IP address provided by your IT department before connecting to the LAN.
Comark Instruments provides a Windows utility: RF500A-CONFIG to allow changing or viewing the Gateway IP
address via the USB port.
Requirements for RF500A-CONFIG
•
Windows XP, Windows XP 64-bit or Windows 7, Windows 7 64-bit
•
Comark USB Drivers (The USB drivers must be installed prior to installing RF500A-CONFIG)
•
Oracle (previously Sun) Java Runtime Environment 1.6.0 or later
Installation of USB Drivers
Obtain Comark USB Drivers
Comark USB Drivers can be downloaded from the following websites:
•
http://www.comarkinstruments.com/software.tpl – UK and International
•
http://www.comarkusa.com/software.tpl – USA, Canada and South America
Click the
Comark USB Driver.exe
link shown on web page above. Fill in the form and tick the box to confirm you
have read the Software License Agreement. Proceed to download the file and choose the
save
option to start the
download.