CiDRA SONARtrac Quick Start - Manual (Page 24)

4.2.5.3 Preambles/Response Preambles
The number of Preambles or Response Preambles should not need to
be changed unless the 4-20mA current loop is noisy. The maximum
preambles setting is 20.
Figure 10 HART Preambles and Response Preambles
4.2.6 Transmitter Configuration File HART Settings
In addition to the transmitter front panel inputs, the following inputs
can be made through one of the SONARtrac Utility Programs.
4.2.6.1 Description
Any string of 16 valid HART characters. This is used to describe the
transmitter application, tag number, or any other information the
customer may wish.
4.2.6.2 Date
Date field readable by the attached HART master. This can be used
to save an installation date for example.
4.2.6.3 Tag
Any string of 8 valid HART characters. This string will appear on the
display of the Model 275 HART communicator.
4.2.6.4 Long Tag
Any string of 40 valid HART characters. Used in HART Universal
Command Rev 6 as a HART identifier.
4.2.6.5 Message
Any string of 32 HART characters. This string is shown on the lower
left of the SONARtrac display, and may be used to identify the
installation.
4.2.6.6 Device Serial Number
3 digit serial number of the transmitter.
4.2.6.7 Final Assembly
Three (3) digit final assembly number of the transmitter.
4.2.6.8 Damping
Currently not used.
Copyright © 2007 CiDRA Corporation Page 4-4
20984-01 Rev 01