Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 26

ＮＣＰ１２ August, 1999～July, 2002

ＮＣＰ１３ Before M./C October, 2000～July, 2002

ＮＣＰ１３ After M/C August 2002～

B Line Ground (Connect

with the Black line

A Line (Connect with the Yellow

B Line Ground （Connect with the Back

A Line (Connect with the

Yellow line)

⑩

Connect the blue wire from the 28. Relay Harness taken to the interior of the
vehicle in step ⑥ with the 27. Clutch Switch’s blue wire.

※

Cut the red wire to the appropriate length.

⑨

Use the 39. Electro Tap to connect the red wire for the 27. Clutch Switch’s to
the ignition ON power line.

⑦

Use the 40. Wire Connector or 39. Electro Tap to connect the yellow wire for
the 27. Clutch Switch’s to the computer’s A line shown in the below figure.

⑧

Use the 39. Electro Tap to connect the black wire for the 27. Clutch Switch’s
to the computer’s B line (ground) shown in the below figure.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No parts of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes