Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 15

8) Install back the Air Bag Sensor.

9) Remove two stud bolts from the genuine

intake manifold.

10) Install 3.two Large Nipples to the4. Inlet

Pipe.
※

Use a seal tape or some kind of sealant.

11) Install the two stud bolts that were removed

to the 4.Inlet Pipe.

12) Install the 25.Sink Plug to the 3.Intake

Manifold.（１２）
※

Use a seal tape or some kind of sealant.

※

Install a 24.Small Nipple if planning to
install a boost gauge.

Stud Bolts

4. Inlet Pipe

23. Large Nipple

4. Inlet Pipe

Genuine Stud

3.Intake Manifold

25.

Sink Plug

24.

Small Nipple

Genuine Intake
Manifold

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No parts of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes