Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 22

37) 26. Regulator replacement procedure.

WARNING: All images and text in this manual is the p
No parts of this manual may be reproduced, stored
without prior written permission of Blitz Co., Ltd. (Japan).

rope

in retri

rty of Blitz Co., Ltd. (Japan).

eval systems, or transmitted in any way

Rear Seat Cushion

Assembly

Assembly w/ Pump

Fuel Suction Tube

Joint

Clip

Tube Set Plate

Rear Floor Service Hole Cover

Fuel Pump Tube

Fuel Evaporation Tube

No. 2

Fuel Tank Vent

①

Types of rear seats.
Dividable:

Remove the headrests then push forward
the rear seat.

Non-dividable:

Remove the rear seat cushion assembly
then disconnect the fuel pump
connector.

②

Disconnect the fuel pump tube.
a.

Before start working, clean up the

dirt around the clip.

Remove the joint clip and pull up

wards.

Warning:

・

Be extra careful not to damage or attach
any foreign substance while removing the
tube, since an O-ring is sealing the
plugging section of the nylon tube suction
plate of the quick connector.

・

Only use your hands for the disconnecting
procedure, DO NOT use any tools.

・

DO NOT rotate or bend the nylon hose
with force.

・

DO NOT attach any foreign particles to
plugging section.

Clip

O Ring

Fuel Suction Plate

Fuel Pump Tube

Fuel Tube Joint

Online Manual Not For Resale Purposes