Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 18

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No parts of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

24) Install the 2.Chamber using the

5.CompressorGasket; four ①Flange Bolts and
two ②Flange Bolts.

Install back the removed fuel delivery pipe in

22)

“steps 17) and 18)”.

Secure the harness to the fuel delivery pipe
using the 32.Lock Tight L.

20) Install the 7.Tension Bracket A at the nose

section of the Compressor aligning the two
upper holes of the bracket with the two holes
at the lower section of the compressor’s nose
using two ④flange Bolts.

※

Fully

23)

④

Flange

tighten the 6.alternator Bracket and

the 7.Tension Bracket.

Bolt

７

.Tension

Bracket A

①Flan

Bolt

⑫

Fla

nge

Nut

11.Level gauge

Stay

⑦Flange Bolt

⑭

Flange Nut

Genuine

Oil

Level G

auge

Guide

21) To install the genuine oil level gauge guide,

attach the 11.Level Gauge Stay by loosening
the ⑦Flange Bolt and the ⑭Flange Nut that
is holding the 9.Compressor Stay and use one

①

Flange Bolt and one ⑫Flange Nut.

Harness

32.Lock Tight

①

Flange Bolt

②

Flange Bolt

2.Chmaber

Online Manual Not For Resale Purposes