Barranca Diamond MK-5005S Block Saw - Manual (Page 11)

11
The MK-5005S uses a 14-inch or 20-inch diameter segmented MK Diamond blade with a .125-inch
cutting width and a 1” arbor.
The MK-5005S can cut a variety of masonry types including, cinder block, slump stone block, wall
brick, paver brick, concrete block and cylinders, roofing tile, marble, granite, decorative rock or almost
any other non-ferrous material.
The MK-5005S is a versatile masonry saw. Operated and used according to this manual, the MK-
5005S will provide years of dependable service.
General Description:
The MK-5005S, is engineered as a 14” or 20” saw, consisting of a powerful 230v single phase motor.
The saw is capable of cutting brick and masonry up to 8” x 8” x 16” in size in a single pass.
Motor and Weight Specifications:
Motor and weight specifications for the MK-5005S are listed in the table below.
Voltage 208 / 230v
Amperage 24
Frequency 50 Hz 60 Hz
RPM 2850 rpm 3,450
Weight 445 lbs.*
SPEcIFIcaTIoN
BlaDE caPacITY
PEDDlE aSSISTED cUTTING HEaD
MaSoNRY TYPES
NoTE: The MK-5005S is not designed to cut plastic or ferrous (metals) material.
The MK-5005S is designed with a peddle assisted Cutting Head to allow the operator to use both
hands when cutting. The Cutting Head can be raised or lowered by the use of an adjusting wheel to
set the start of the cut.
MK-5005S PRoDUcT SPEcIFIcaTIoNS
*Without Movable Cutting Table