MK Diamond MK-170 - Manual (Page 10)

10
Use of under sized extension cords result in low voltage to the motor that can
result in motor burnout and premature failure. MK Diamond warns that equipment
returned to us showing signs of being run in a low voltage condition, through the use
of undersized extension cords will be repaired or replaced totally at the customer's
expense. There will be no warranty claim.
To choose the proper extension cord,
• Locate the length of extension cord needed in the table below.
• Once the proper length is found, move down the column to obtain the correct
AWG size required for that length of extension cord.
To reduce the risk of electrocution, keep all connections dry and off the ground. Do
not touch the plug with wet hands.
waRNiNG
waRNiNG
eXTeNSiON CORD MiNiMUM GaGe FOR leNGTH
VOlTS TOTal leNGTH OF CORD iN FeeT
25 ft. awG 50 ft. awG 100 ft. awG 150 ft. awG
115v 14 12 Not Recommended Not Recommended
230v N/A 14 12 N/A
MK-170 Tile Saw SaFeTY